Took the headtracker out as I wasn’t expecting much lift today. At best 25kts (12.8m/s) at Pat Moreton. Flew perfectly, but the glide slope was not enough to keep altitude. 763g. Still waiting on props to arrive. ‘Tas heaps of drag points which could be eliminated. Could make a larger wingspan for these wind speeds.
Would be interesting to see what CFD says and how it compares to reality.
Would like to get flight stabilization happening so it’s easier to fly FPV with the head tracker initially. At least if I balls it up I can throttle off, let go of the sticks and it will have some chance of landing flat. Would also be able to see compass headings, altitude and battery on screen through the OSD.
Think I’ll start here first and see if it works with that F3 board.
Put the motor in and re-balanced it. Flew at around 14:00ish under power with about a 30kt NNE (15.43m/s) for backup glideability. Flew so well. Only hit about half throttle with a 4s. Had heaps of lift, so I’d say I could max out at about 1kg payload with more throttle. Now onto a flight controller before sticking the head tracker in.
The Sentach glider worked well today at the Pat Moreton park in about 15-20kts NNE. Videos to be posted shortly.
Flight weight 680g.
COG 310mm from the L.E.
Beautifully smooth flat landings. Some wobbles as expected. The’s alot of drag points. Especially with the flat sides of the nose. Don’t think anhedral would totally fix it because of the nose as it’s obvioualy turbulating when a crosswind happens.
Crashes it once and the wing popped off nicely dispursing the impact force. Plugged it back together and went again.
The angled wingtips wouldn’t stop the tip vortex as XFLR5 shows in the sim.s. would be better to round into them like Gemot. The difference they made to Gemot was nothing short of impressive. Holding Gemots wing in one hand whilst spinning around, with and without wingtips gives a tactile feeling of the drag differnce involved.