INAV F3 Flight controller arrived

Will have to make some time to put this one into action. Hopefully the telemetry going to the OSD will overcome the issue of knowing where the horizon is in flight when staring up into the big blue. The altitude feedback will be good also. Wouldn’t mind fitting an angle of attack indicator to the OSD, ,,, well one thing at a time.

Zamten – Flying wing with a quad chassis

Prototype from fibre glass panel either side. Joiner tubes –> Tapped some 6.2mm alloy tube with an M5 thread. Joined with M5 (thread length 17mm). Carved wing quickly with 50mm thick EPS foam (12kg/m^3) using 60 grit sand paper.